3 Can’t-Live-Without Sewing Machine Features You Might Not Know About
Don’t get swept away by all the bells and whistles on sewing machine models. Let’s talk about what’s actually worth the extra cost. I will help you understand time-saving and quality features so you can enjoy the perfect machine without any buyer’s remorse.
I have found that these three sewing machine features are essential for saving time and achieving professional-quality finishes. I highly recommend making full use of them.
First, Some Context
When I turned 14, I received a new sewing machine for my birthday. It was beautiful to me; a mid-range Singer with a sturdy frame, lots of stitches, and a few extra feet. I could hardly believe that my mother had saved up so much money and was willing to spend it on me.
I sewed that machine to death – literally! I used it all through my teenage years and even took it to college. Finally, I wore it out when I was sewing for my third child. Over the next few years, I made do with the best used sewing machines that I could afford, but they didn’t have any better features than those on my first Singer sewing machine.
Finally, I was fortunate enough to buy a used Bernina 1530. It might have been older than the machine I received for my birthday many years before, but it had some high-end features that I had never seen before… and my life was changed!
Since then, as I’ve visited quilt shows and different fabric shops, I’ve been able to test drive many different sewing machines and even take home a few new ones. In all my experience I have found a few features that I find absolutely essential.
1. I LOVE a knee lift!
I can’t say enough about this. The knee lift allows me to raise and lower the presser foot with my knee so I don’t have to let got of my work and use my hand. I once had a friend who owned this same Juki TL-2010Q that I do and she told me she never tried the knee lift.
I nearly did a forehead-palm slap – on her! Imagine if you could use both hands to place your fabric (or elastic or ribbon or combination of all three) under the sewing machine foot and then not need to let go and use your hand to lower the foot – I hear a choir of angels!
That’s how good the knee lift is. And that’s why I hope I never buy another sewing machine without one.
One clue that a sewing machine might use a knee lift (even if you don’t see it installed) is a little hole in the sewing machine shown above. Don’t assume that the machine will come with a knee lift just because you see a hole or dark spot in that location – make sure you ask before you buy.
2. A thread cutter will change your life!
In the picture above, you see that this machine (again, the Juki TL2010Q) has a needle up/down feature, a thread cutter, and a speed control. Those are all very nice sewing machine features, but the one that changed my life most was the thread cutter.
You can also activate the Juki’s thread cutter by rocking backward on the foot controller. Guests in my sewing studio have cried out when they accidentally activated it. They were cries of joy, I’m sure.
Who wouldn’t love the top thread to be automatically pulled to the bottom and clipped after every finished seam? That’s exactly what the thread cutter does.
My newer Janome 14000 sewing machine also has a thread cutter (along with a needle threader, needle up/down, foot up/down, and tie-off stitch), but I can’t activate the thread cutter with my foot. That wasn’t very pleasant to get used to.
3. Multiple dual-feed options will blow you away.
I consider a dual-feed foot (or walking foot) a necessity for specific projects, but some sewing machines take the dual-feed feature to a whole new level. Many Pfaff sewing machines and some Berninas have a built-in dual feed option that can be used with any of the included feet.
The Janome 14,000 doesn’t have a built-in dual feed, but I have two different walking feet – wide and narrow.
On top of that, both the wide and the narrow walking foot have interchangable soles.
For example, I can use a 1/4” piecing sole (that has a guide) when sewing with the wide dual feed foot. Or I can install the zipper-foot sole using the narrow dual feed foot.
Using dual feed in so many different situations makes my quilt piecing more accurate and my purses and bags more professional.
I’m spoiled, for sure.
These are my hands-down favorite sewing machine features… what are yours? Tag me on Instagram @sewcanshe and let me know.
More from SewCanShe:
95 Scrappy Free Sewing Patterns to Empty Your Fabric Scrap Bin
Baskets, Bins, Buckets, and More: 30 Free Sewing Patterns & DIY Storage
25 Amazing 3-Yard Quilts (Free Patterns Inside!)
Disclosure: some of my posts contain affiliate links. If you purchase something through one of those links I may receive a small commission, so thank you for supporting SewCanShe when you shop! All of the opinions are my own and I only suggest products that I actually use. 🙂